Dell Latitude 5495 - Installing Display Panel

Installing display panel
1 Connect the display cable to the connector and ax the adhesive strip.
2 Ax the conductive tape to secure the display cable.
3 Replace the display panel to align with the screw holders on the display assembly.
4 Replace the four M2x3 screws to secure the display panel to the display back cover.
5 Install the:
a display bezel
b display assembly
c display hinge cover
d WLAN card
e WWAN card (optional)
f battery
g base cover
6 Follow the procedure in After working inside your computer.
Disassembly and reassembly
55