Dell Latitude 5495 - Secure Boot Screen Options

Option Description
Default Setting: Enable Strong Password is not selected.
NOTE: If Strong Password is enabled, Admin and System passwords must contain at least one uppercase
character, one lowercase character and be at least 8 characters long.
Password
Conguration
Allows you to determine the minimum and maximum length of Administrator and System passwords.
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they
are set. The options are:
• Disabled
• Reboot bypass
Default setting: Disabled
Password Changes Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting: Enable Non-Admin Password Changes is selected.
Non-Admin Setup
Changes
Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set.
If disabled the setup options are locked by the admin password. The option “Allow Wireless Switch changes" is
disabled by default
UEFI Capsule
Firmware Updates
Allows yout to control whether this system allows BIOS updates via UEFI capsule update packages.
• Enable UEFI Capsule Firmware Updates (enabled by default)
Computrace Allows you to activate or disable the optional Computrace software The options are:
• Deactivate computrance
• Disable computrance
• Activate computrance
NOTE: The Activate and Disable options will permanently activate or disable the feature and no further
changes will be allowed
Enable Admin
Setup Lockout
Allows you to prevent users from entering Setup when an Administrator password is set.
Default Setting: Disabled
Secure Boot screen options
Option
Description
Secure Boot The option Enable Secure Boot is selected by default.
Expert Key
Management
Allows you to manipulate the security key databases only if the system is in Custom Mode. The Enable Custom
Mode option is disabled by default. The options are:
• PK
• KEK (default)
• db (default)
• dbx (default)
If you enable the Custom Mode, the relevant options for PK, KEK, db, and dbx appear. The options are:
84 System setup options