NOTE: Use a plastic scribe to pry the keyboard lattice from the pry points and move around the lattice for removal.
Installing keyboard lattice
1 Place the keyboard lattice on the keyboard and press along the edges and in between the rows of keys until the lattice clicks in place.
2 Follow the procedure in After working inside your computer.
Removing the keyboard
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c keyboard lattice
3 To remove the keyboard:
a Lift the latch and disconnect the keyboard cable from the connector on the system.
b Lift the latch and disconnect the keyboard backlight cables from the connectors on the system [2,3,4].
NOTE
: Number of cables to disconnect is based on the keyboard type.
34 Disassembly and reassembly
To Next Page
Loading...
