SmartCard module
Removing smart card reader board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c hard drive
d SSD card
e SSD frame
f WLAN card
g WWAN card (optional)
h chassis frame
3 To release the smart card reader board:
4 To remove the smart card reader board:
a Remove the 2 (M2x3) screws that secure the smart card reader board to the palmrest [1].
b Slide and lift the smart card reader from the slot in the system [2].
40 Disassembly and reassembly
To Next Page
Loading...
