EasyManua.ls Logo

Dell Latitude 5495 - System Configuration Screen Options

Dell Latitude 5495
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Option Description
Processor Information: Displays Processor Type, Core Count, Processor ID, Microcode Version, Current Clock
Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache,
Simultaneous Multi-Threading Capable, and 64-Bit Technology.
Device Information: Displays Primary Hard Drive, MiniCard SSD Device, LOM MAC Address, Audio controller,
Wi- Device, Cellular Device, Bluetooth Device.
Video Device Information: Video controller, video BIOS version, Video Memory, Panel type, and Native
Resolution
Battery Information Displays the battery status and health of the battery connected to the computer.
Date/Time Allows you to change the date and time.
Boot Sequence Allows you to change the order in which the computer attempts to nd an operating system.
Diskette Drive
Internal HDD
USB Storage Device
CD/DVD/CD-RW Drive
Onboard NIC
Advanced Boot
Options
This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is disabled.
BIOS Setup
Advanced mode
This option enables you to select the "BIOS Setup Advanced mode" option
System Conguration screen options
Option
Description
Integrated NIC Allows you to congure the integrated network controller. The options are:
Disabled
Enabled
Enabled with PXE: This option is enabled by default.
SATA Operation Allows you to congure the internal SATA hard-drive controller. The options are:
Disabled
AHCI: This option is enabled by default.
Drives Allows you to congure the drives on board. All drives are enabled by default. The options are:
SATA (default)
M.2 PCIe SSD (default)
SMART Reporting This eld controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specication. This option is
disabled by default.
Enable SMART Reporting
USB Conguration
This is an optional feature.
This eld congures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices (HDD, memory key, oppy).
82 System setup options

Table of Contents

Related product manuals