5 Follow the procedure in After working inside your computer.
Display assembly
Removing display assembly
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c WLAN card
d WWAN card (optional)
e display hinge cover
3 To disconnect the display cable:
a Release the WLAN and WWAN cables from the routing channels [1].
b Remove the two (M2x3) screws that secure the display cable bracket in place [2].
c Remove the display cable bracket that secures the display cable from the system [3].
d Disconnect the display cable from the connector on the system board [4].
e Remove the single screw that secure the power connector bracket and also the display cable to the system [5].
4 To release the display assembly:
a Remove the two M2x5 screws that secure the display assembly to the computer [1].
b Release the WLAN cable, WWAN cable, and display cable through the routing channels [2] [3].
48
Disassembly and reassembly
To Next Page
Loading...
