]
Steps
1. Align and place the speaker in its slot on the system board.
2. Reconnect the fan FPC and left speaker cable to the connector on the system board.
Next steps
1. Install the display assembly.
2. Install the SIM tray.
3. Follow the procedure in After working inside your computer.
Rear Camera
Removing the rear-facing camera
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM tray
3. Remove the display assembly.
About this task
The following images indicate the location of the rear-facing camera module and provide a visual representation of the removal
procedure.
Removing and installing components
29
To Next Page
Loading...
