Dell Latitude 7320 Detachable - Fingerprint Reader; Removing the Fingerprint Reader

Steps
1. Align and place the power-button board on the frame.
2. Replace the two screws (M1.6x1.5) that secure the power-button board to the frame.
3. Connect the power-button daughter board FPC and the fingerprint reader FFC to the power-button daughter board
Next steps
1. Install the right system fan.
2. Install the WWAN card.
3. Install the display assembly.
4. Install the SIM tray.
5. Follow the procedure in After working inside your computer.
Fingerprint reader
Removing the fingerprint reader
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM tray.
3. Remove the display assembly.
4. Remove the WWAN card.
5. Remove the right system fan.
6. Remove thepower-button board
About this task
The following images indicate the location of the fingerprint reader and provide a visual representation of the removal
procedure.
54
Removing and installing components