Steps
1. Align the screw holes on the right system fan with the screw holes on the frame.
2. Replace the two screws (M2x3) to secure the right system fan to the frame.
3. Connect the right system fan FPC to the connector on the system board.
Next steps
1. Install the display assembly.
2. Install the SIM card.
3. Follow the procedure in After working inside your computer.
Volume button daughter board
Removing the Volume button daughter board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM tray.
3. Remove the display assembly.
4. Remove the WWAN card.
5. Remove the left system fan.
About this task
The following images indicate the location of the Volume button daughter board and provide a visual representation of the
removal procedure.
50
Removing and installing components