Steps
1. Align and place the right microphone into the slot on the display back cover.
2. Connect the right microphone module to the front-facing camera module.
NOTE:
The right microphone module must be connected to both the front-facing camera and system board. Failure to
make both of these connections will result in the front-facing camera not working..
3. Connect the right microphone module FPC to the connector on the system board.
4. Place the system board shield on the system board and gently press until it snaps it into place.
Next steps
1. Install the display assembly.
2. Install the SIM tray.
3. Follow the procedure in After working inside your computer.
Removing the left microphone module
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM tray
3. Remove the display assembly.
About this task
The following images indicate the location of the left microphone module and provide a visual representation of the removal
procedure.
Removing and installing components
33
To Next Page
Loading...
