Smart card reader
Removing the smart card reader
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM tray.
3. Remove the display assembly.
4. Remove the WWAN card.
5. Remove the left system fan.
6. Remove the right system fan.
7. Remove the solid-state drive.
8. Remove the Microphone.
9. Remove the kickstand.
10. Remove the kickstand hinges.
11. Remove the heat sink.
12. Remove the system board.
13. Remove the battery.
About this task
The following images indicate the location of the smart card reader and provide a visual representation of the removal
procedure.
64
Removing and installing components
To Next Page
Loading...
