Before Working on Your Computer: Dell Latitude E4300 Service Manual
file:///C|/Biz%20Client/2015/Lola%20(Defect%20Fix)/before.htm[5/25/2015 11:14:03 AM]
After Working on Your Computer
After you have completed the replacement procedures, ensure you connect the external devices, cards, cables, and so on,
before turning on your computer.
NOTE: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use
batteries designed for other Dell computers.
1. Connect any external devices, such as a port replicator, battery slice, or cool slice, and replace any cards (such as a
smart card).
2. Connect any telephone or network cables to your computer.
3. Replace the battery. Slide the battery into the battery bay until it clicks into place.
4. Connect your computer and all attached devices to their electrical outlets.
5. Turn on your computer.
Back to Contents Page
To Next Page
Loading...
