Processor Thermal-Cooling Assembly: Dell Latitude E4300 Service Manual
file:///C|/Biz%20Client/2015/Lola%20(Defect%20Fix)/cpucool.htm[5/25/2015 11:14:18 AM]
11. In consecutive order, loosen the four captive screws (labeled "1" through "4") that secure the processor thermal-
cooling assembly to the system board.
12. Remove the processor thermal-cooling assembly from the computer.
Replacing the Processor Thermal-Cooling Assembly
CAUTION: Before working inside the computer, read the safety information that shipped with the
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at: www.dell.com/regulatory_compliance.
NOTE: This procedure assumes that you have completed the removal procedure first.
1. Reseat the processor thermal-cooling assembly on the underside of the system board.
2. In consecutive order, tighten the four captive screws labeled "1" through "4."
3. Replace the system board (see Replacing the System Board Assembly
).
4. Replace the optical drive (see Replacing the Optical Drive
).
5. Replace the system fan (see Replacing the System Fan
).
6. Replace the palm rest (see Replacing the Palm Rest
).
7. Replace the display assembly (see Replacing the Display Assembly
).
8. Replace the keyboard (see Replacing the Keyboard
).
9. Replace the LED dashboard cover (see Replacing the LED Dashboard Cover
).
10. Replace the hard drive (see Replacing the Hard Drive
).
11. Follow the instructions in After Working on Your Computer
.
Back to Contents Page
To Next Page
Loading...
