Smart Card: Dell Latitude E4300 Service Manual
file:///C|/Biz%20Client/2015/Lola%20(Defect%20Fix)/express.htm[5/25/2015 11:14:13 AM]
Back to Contents Page
Smart Card
Dell™ Latitude™ E4300 Service Manual
Removing the Smart Card
Replacing the Smart Card
Removing the Smart Card
CAUTION: Before working inside the computer, read the safety information that shipped with the
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at: www.dell.com/regulatory_compliance.
1. Complete the steps in What You Need to Know For Your Safety
.
2. Remove the hard drive (see Removing the Hard Drive
).
3. Remove the display assembly (see Removing the Display Assembly
).
4. Remove the keyboard (see Removing the Keyboard
).
5. Remove the palm rest assembly (Removing the Palm Rest
).
6. Remove the four M2 x 3-mm screws that secure the card to the computer base.
7. Disconnect the card cable from the system board.
8. Lift the card from the system board.
1 smart card cable 2 M2 x 3-mm screw (4)
3 smart card
Replacing the Smart Card
NOTE: This procedure assumes that you have completed the removal procedure first.
To Next Page
Loading...
