System Board: Dell Latitude E4300 Service Manual
file:///C|/Biz%20Client/2015/Lola%20(Defect%20Fix)/sysboard.htm[5/25/2015 11:14:16 AM]
7. Replace the display assembly (see Replacing the Display Assembly).
8. Replace the keyboard (see Replacing the Keyboard
).
9. Remove the LED dashboard cover (see Removing the LED Dashboard Cover
).
10. Replace the hard drive (see Replacing the Hard Drive
).
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside
the computer. Failure to do so may result in damage to the computer.
11. Follow the instructions in After Working on Your Computer
.
NOTE: If you use a BIOS update program media to flash the BIOS, press <F12> before inserting the media in order to
set the computer to boot from the media for one time only. Otherwise, you must enter the system setup program to
change the default boot order.
12. Flash the BIOS (see Flashing the BIOS
).
13. Enter the system setup program to update the BIOS on the new system board with the computer Service Tag. For
information on the system setup program, see the Dell Technology Guide on your computer or at support.dell.com.
Back to Contents Page
To Next Page
Loading...
