Installing the Bluetooth Module
1. Connect the bluetooth cable to its connector.
2. Tighten the screw to secure the bluetooth module to the computer.
3. Install the:
a) base cover
b) battery
c) ExpressCard
d) SD card
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Hard Drive
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) battery
b) base cover
3. Remove the screws that secure the hard drive to the computer.
4. Remove the hard-drive bracket that secures the hard drive to the computer.
16
To Next Page
Loading...
