Dell Latitude E6230 - Power-Connector Port Procedures

4. Install the:
a) chassis base
b) display assembly
c) speakers
d) heat-sink fan
e) heat sink
f) bluetooth module
g) keyboard
h) palmrest
i) base cover
j) battery
k) ExpressCard
l) SD card
5. Follow the procedures in After Working Inside Your Computer .
Removing the Power-Connector Port
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the:
a) SD card
b) ExpressCard
c) battery
d) base cover
e) palmrest
f) keyboard
g) bluetooth module
h) heat-sink fan
i) heat-sink module
j) speakers
k) base chassis
3. Disconnect the power-connector cable from the system board.
40