Option Description
Keyboard
Illumination
This field lets you choose the operating mode of the keyboard illumination feature. The keyboard brightness
level can be set from 0% to 100%. The options are:
• Disabled
• Dim
• Bright (enabled by default)
Keyboard Backlight
with AC
The Keyboard Backlight with AC option does not affect the main keyboard illumination feature. Keyboard
Illumination will continue to support the various illumination levels. This field has an effect when the
backlight is enabled.
Keyboard Backlight
Timeout with AC
The Keyboard Backlight Timeout dims out with AC option. The main keyboard illumination feature is not
affected. Keyboard Illumination will continue to support the various illumination levels. This field has an
effect when the backlight is enabled.
Keyboard Backlight
Timeout on Battery
The Keyboard Backlight Timeout dims out with Battery option. The main keyboard illumination feature is not
affected. Keyboard Illumination will continue to support the various illumination levels. This field has an
effect when the backlight is enabled.
Unobtrusive Mode This option, when enabled, pressing Fn+F7 turns off all light and sound emissions in the system. To resume
normal operation, press Fn+F7 again. This option is disabled by default.
Miscellaneous
Devices
Allows you to enable or disable the following devices:
• Enable Camera —enabled by default
• SD Card Read Only —enabled by default
• Enable Media Card
• Disable Media Card
Video screen options
Option
Description
LCD Brightness Allows you to set the display brightness depending up on the power source (On Battery and On AC).
NOTE: The video setting will be visible only when a video card is installed into the system.
Security screen options
Option
Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive password.
Deleting the admin password automatically deletes the system password and the hard drive
password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set
System Password Allows you to set, change or delete the system password.
NOTE: Successful password changes take effect immediately.
43
To Next Page
Loading...
