Dell M5200 Medium Workgroup Mono Laser Printer - Auto LF after CR; Postscript Menu

Assign Tray <x>
Assign Env Feeder
Assign Man Env
Assign MP Feeder
Assign Man Paper
Then select a value:
Off*
Printer uses factory default source assignments.
0...199
Select a numeric value to assign a custom value to a source.
None
Source ignores the Select Paper Feed command.
Other Tray Renumber selections:
View Factory Def
Press Menu to display the factory default value assigned to each source.
Restore Defaults
Select Yes to return all tray assignments to factory default values.
Auto CR after LF
Purpose:
To specify whether the printer automatically performs a carriage return after a line feed control command.
Values:
Off*
Printer does not perform a carriage return after a line feed control command.
On
Printer performs a carriage return after a line feed control command.
Auto LF after CR
Purpose:
To specify whether the printer automatically performs a line feed after a carriage return control command.
Values:
Off*
Printer does not perform a line feed after a carriage return control command.
On
Printer performs a line feed after a carriage return control command.
PostScript Menu