Dell OptiPlex 3050 - Page 49

Option Description
• Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode,
Memory Technology, DIMM A Size, DIMM B Size,
• PCI Information: Slot1, Slot2
• Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum
Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit
Technology.
• Device Information: Displays Primary Hard Drive, ODD Device, LOM MAC Address, Video Controller, Video
BIOS Version, Video Memory, Panel Type, Native Resolution, Audio Controller, Wi-Fi Device, Bluetooth Device.
Boot Sequence Boot Sequence Allows you to change the order in which the computer
attempts to nd an operating system. The option is:
• Windows Boot Manager
By default, all the options are checked. You can also
deselect any option or change the boot order.
Boot List Option Allows you to change the boot list option.
• Legacy
• UEFI
Advanced Boot
Options
This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is disabled.
UEFI Boot Path
Security
This option allows you control whether the system prompts the user to enter the Admin password when booting
a UEFI boot path from the F12 boot menu. The options are:
• Always, Except Internal HDD (Enabled)
• Always
• Never
Date/Time Allows you to change the date and time.
Table 8. System Conguration
Option Description
Integrated NIC Allows you to congure the integrated network controller. The options are:
• Disabled
• Enabled
• Enabled w/PXE: (Enabled by default)
Serial Port Allows you to congure built-in serial port operates.
• Disabled
• COM1: (Enabled by default)
• COM2
• COM3
• COM4
SATA Operation Allows you to congure the internal SATA hard-drive controller. The options are:
• Disabled
• AHCI
• RAID On: (Enabled by default)
Drives Allows you to congure the SATA drives on board. All drives are enabled by default. The options
are:
System setup 49