Dell OptiPlex 3050 - Page 50

Option Description
• SATA-0: (Enabled by default)
• SATA-1: (Enabled by default)
• M.2 PCIe SSD-0: (Enabled by default)
SMART Reporting This eld controls whether hard drive errors for integrated drives are reported during system
startup. This technology is part of the SMART (Self-Monitoring Analysis and Reporting
Technology) specication.
• Enable SMART Reporting (Disabled by default)
USB Conguration This eld congures the integrated USB controller. If Boot Support is enabled, the system is
allowed to boot any type of USB Mass Storage Devices (HDD, memory key, oppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
• Enable Boot Support
• Enable Side USB Ports
• Enable Rear USB Ports
NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these
settings.
Rear USB Conguration This eld enables or disables the rear USB conguration
• Left*
• Center Right
• Center Left*
• Right
NOTE: *Left port denotes a USB 3.1 Gen 1 capable port.
Side USB Conguration This eld enables or disables the side USB conguration
• Side Port 1 (Top)*
• Side Port 2 (Bottom)*
NOTE: *Side Port 1 (Top) port denotes a USB 3.1 Gen 1 capable port.
USB PowerShare Allows you to congures the USB PowerShare feature behavior.
• Enable USB PowerShare (Disabled)
Audio This eld enables or disables the integrated audio controller. By default, the Enable Audio option
is selected. The options are:
• Enable Microphone
• Enable Internal Speaker
OSB Button Management This eld allows the user to disable the OSB (On-Screen Display) buttons on their AIO.
• Disabled OSD Buttons (Disabled)
Touchscreen This eld controls whether the touchscreen is enabled or disabled.
• Touchscreen (Enabled)
Miscellaneous Devices Allows you to enable or disable the following devices:
• Enable Camera (Enabled)
• Enabled Secure Digital (SD) Card (Enabled)
50 System setup