EasyManua.ls Logo

Dell OptiPlex 3050 - Page 51

Dell OptiPlex 3050
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Option Description
Secure Digital (SD) card Boot
Secure Digital (SD) card Read-Only Mode
Table 9. Security
Option Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive
password. Deleting the admin password automatically deletes the system password
and the hard drive password.
NOTE: Successful password changes take eect immediately.
Default Setting: Not set
System Password Allows you to set, change, or delete the system password.
NOTE: Successful password changes take eect immediately.
Default Setting: Not set
Internal HDD-0 Password Allows you to set, change, or delete the password on the system's internal hard-disk drive.
NOTE: Successful password changes take eect immediately.
Default Setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE: If Strong Password is enabled, the Admin and System passwords must contain
at least one uppercase character, one lowercase character and be at least 8
characters long.
Password Conguration Allows you to determine the minimum and maximum length of the Administrator and System
passwords.
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD
password, when they are set. The options are:
Disabled
Reboot bypass
Default Setting: Disabled
Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the
admin password is set.
Default Setting: Allow Non-Admin Password Changes is selected.
UEFI Capsule Firmware Updates Allows you to controls whether the system allows BIOS update via UEFI capsule update
packages. Default setting: Enable
TPM 1.2 Security Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
TPM On (Enabled)
Clear
PPI Bypass for Enabled Commands
Enabled (Enabled)
Disabled
System setup 51

Table of Contents

Other manuals for Dell OptiPlex 3050

Related product manuals