Table 14. POST Behavior
Option Description
Adapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use
certain power adapters.
• Default Setting: Enable Adapter Warnings
Numlock LED This option species whether the NumLock LED should be on when the system boots.
• Enable Numlock LED: The option is enabled.
Keyboard Errors This option species whether the keyboard related errors are reported when it boots.
• Enables Keyboard Error Detection: The option is disabled.
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The
options are:
• Minimal(default)
• Thorough
• Auto
Extended BIOS POST Time Allows you to create an additional preboot delay. The options are:
• 0 seconds. This option is enabled by default.
• 5 seconds
• 10 seconds
Full Screen Logo This option displays full screen logo if your image match screen resolution.
• Enable Full Screen Logo (Disabled)
Warnings and Errors This option is caused when warnings and errors are detected.
• Prompt on Warnings and Error (Enabled)
• Continue on Warnings
• Continue on Warnings and Errors
Table 15. Virtualization Support
Option Description
Virtualization Allows you to enable or disable the Intel Virtualization Technology.
• Enable Intel Virtualization Technology (default)
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O — enabled by default.
Table 16. Wireless
Option Description
Wireless Device Enable This eld allows enabling/disabling of internal wireless devices.
• WLAN/WiGig
System setup 55
To Next Page
Loading...
