8. Install the 3.5-inch hard drive.
9. Install the graphics card.
10. Install the wireless card.
11. Install the external puck antenna, if applicable.
12. Install the M.2 2230 solid-state drive or the M.2 2280 solid-state drive, whichever is applicable.
13. Install the memory module.
14. Install the front bezel.
15. Install the coin-cell battery.
16. Install the side cover.
17. Follow the procedure in After working inside your computer.
Removing and installing Field Replaceable Units (FRUs) 115
To Next Page
Loading...
