Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Recommended tools
The procedures in this document require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Small plastic scribe
Removing the back cover
1 Follow the procedures in Before working inside your computer.
2 Remove the screws that secure the back cover to the computer.
Figure 5. Removing screws
3 To remove the cover:
a Using a scribe, pry the edges of the back cover from all sides [1].
3
12 Removing and installing components
To Next Page
Loading...
