Installing the speakers
1 Insert the speakers into the slot on the computer chassis.
2 Route the speaker cable along the routing channel.
3 Connect the speaker cables to the connectors on the system board and the LED board.
4 Install the:
a battery
b back cover
5 Follow the procedure in After working inside your computer
Removing the system board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a back cover
b battery
c WLAN card
d SSD
e memory
f LED board
g system fan
h heat sink
i display assembly
3 Lift the tab [1,2,3,4,6] to disconnect the cables [5] from their connectors on the system board.
32
Removing and installing components
To Next Page
Loading...
