Dell P62F001 - Memory Features; Verifying System Memory in Windows 10; Verifying System Memory in Windows 8; Verifying System Memory in System Setup (BIOS)

Product Name Displays the product name and the model number.
Service Tag Displays the service tag of your computer.
Asset Tag Displays the asset tag of your computer (if available).
CPU Type Displays the type of processor.
CPU Speed Displays the speed of the processor.
CPU ID Displays the processor ID.
L1 Cache Displays the processor L1 cache size.
L2 Cache Displays the processor L2 cache size.
L3 Cache Displays the processor L3 cache size.
Fixed HDD Displays the model number and capacity of the hard drive.
mSATA Device Displays the model number and capacity of the optical drive.
System Memory Displays the memory in-built on the computer.
Extended Memory Displays the memory installed on the computer.
Memory Speed Displays the memory speed.
Table 6. Advanced
Intel SpeedStep Enable or disable the Intel SpeedStep feature. Default: Enabled
Virtualization Enable or disable the Intel Virtualization
feature.
Default: Enabled
Integrated NIC Enable or disable the power supply to the on–
board network card.
Default: Enabled
USB Emulation Enable or disable the USB emulation feature. Default: Enabled
USB Powershare Enable or disable the USB powershare
feature.
Default: Enabled
SATA Operation Change the SATA controller mode to either
ATA or AHCI.
Default: AHCI
Adapter Warnings Enable or disable the Adapter Warnings. Default: Enable
Function Key Behavior Species the behavior of the function key
<Fn>.
Default: Function key
Intel Smart Connect Technology Enable or disable Intel Smart Connect
Technology.
Default: Enable
Intel Rapid Start Technology Enable or disable Inter Rapid Start
Technology.
Deafult: Enable
Miscellaneous Devices These elds let you enable or disable various
on-board devices.
Battery Health Displays a message about the battery health.
Table 7. Security
Set Asset Tag This eld displays your system's asset tag. If the asset tag is not already set, this eld can be
used to enter it.
Set Admin Password Allows you to change or delete the administrator password.
Set System Password Allows you to change or delete the system password.
Set HDD Password Allows you to set a password on the computer's internal hard drive (HDD).
System Setup 59