Installing the touch pad
1 Align the touch pad assembly on the computer chassis.
2 Install the screws that secure the touch pad assembly.
3 Place the metal bracket over the touch pad assembly.
4 Install the screws that secure the metal bracket to the touch pad assembly.
5 Connect the touch pad cables to the connectors on the computer.
6 Ax the adhesive tape over the touch pad assembly.
7 Install the:
a WLAN card
b battery
c back cover
8 Follow the procedure in After working inside your computer
Removing the coin cell battery
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a back cover
b battery
3 To remove the coin cell battery:
a Pry the coin cell battery upwards from its slot using a scribe [1] .
b Lift and remove the coin cell battery [2].
24
Removing and installing components
To Next Page
