Figure 45. Installing an expansion card from the expansion card riser
1 expansion card riser 2 expansion card riser cage
3 expansion card retention latch 4 expansion card
Figure 46. Installing a full height, full length expansion card from the expansion card riser
1
full height, full length expansion card latch (on cooling
shroud)
2 full height, full length expansion card
3 expansion card riser cage 4 expansion card retention latch
Next steps
1 Install the expansion card riser.
2 If disconnected, connect the required power or data cables to the expansion card.
3 If required press the expansion card latch on the cooling shroud to support the full length expansion card .
4 Follow the procedure listed in the After working inside your system section.
5 Install any device drivers required for the expansion card as described in the documentation for the card.
Installing and removing system components
105
To Next Page
Loading...
