Dell PowerEdge R530 - Back Panel Features for a Non-Redundant Power Supply Unit Chassis and a Redundant Power Supply Unit Chassis

Back panel features for a non-redundant power supply unit
chassis and a redundant power supply unit chassis
Figure 4. Back panel features for a non-redundant power supply unit chassis and a redundant power supply unit chassis
1
Serial connector 2 Ethernet connectors (2)
3 vFlash media card slot (optional) 4 iDRAC8 Enterprise port
5 Full height PCIe expansion card slots (2) 6 Redundant power supply unit
7 Non-redundant power supply unit 8 Half height PCIe expansion card slots (5)
9 Ethernet connectors (2) 10 System identication connector
11 System identication button 12 USB connector
13 USB connector 14 Video connector
Table 3. Back panel features for a non-redundant power supply unit chassis and a redundant power supply unit chassis
Item Indicator, button, or connector Icon Description
1 Serial port
Use the serial port to connect a serial device to the system. For
more information about the supported serial port, see the Technical
specications section.
2 Ethernet connectors (2) Two integrated 10/100/1000 Mbps Network Interface Card (NIC)
connectors
or
Four integrated connectors that include:
• Two 10/100/1000 Mbps NIC connectors
• Two 100 Mbps/1 Gbps/10 Gbps SFP+/10 GbE T connectors
3 vFlash media card slot (optional)
Enables you to insert a vFlash media card.
14 Dell PowerEdge R530 system overview