Dell PowerEdge R530 - Installing a Hard Drive into a Hard Drive Carrier

Figure 31. Removing a hard drive into a hard drive carrier
1 screw (4) 2 hard drive
3 hard drive carrier
Installing a hard drive into a hard drive carrier
Prerequisite
CAUTION: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage
due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
Steps
1 Insert the hard drive into the hard drive carrier with the connector end of the hard drive toward the back of the carrier.
2 Align the screw holes on the hard drive with the screws holes on the hard drive carrier.
When aligned correctly, the back of the hard drive is ush with the back of the hard drive carrier.
3 Attach the screws to secure the hard drive to the hard drive carrier.
Figure 32. Installing a hard drive into a hard drive carrier
1
screw (4) 2 hard drive
3 hard drive carrier
Next step
Install the hot swappable hard drive carrier.
Installing and removing system components
89