Figure 59. Installing a processor
1
socket-release lever 1 2 pin–1 corner of the processor
3 processor 4 slot (4)
5 processor shield 6 socket-release lever 2
7 processor socket 8 tab (4)
Next steps
NOTE
: Ensure that you install the heat sink after you install the processor. The heat sink is necessary to maintain proper thermal
conditions.
1 Install the heat sink.
2 Install the cooling shroud.
3 While booting, press F2 to enter System Setup and verify that the processor information matches the new system conguration.
4 Run the system diagnostics to verify that the new processor operates correctly.
Related link
Safety instructions
Before working inside your system
After working inside your system
Removing the cooling shroud
Removing the optional expansion card riser
Installing the optional expansion card riser
Installing the cooling shroud
Installing a heat sink
Installing and removing system components
125
To Next Page
Loading...
