Installing, Removing, and Replacing
file:///T|/htdocs/stor-sys/ML6000/en/html/ch08.htm[9/17/2012 1:50:35 PM]
The power cord is now secured to the 9U Library Expansion Module. Repeat these steps to secure other power cords, if
necessary. Bundle adjacent power cords together using the same hook-and-loop fastener.
Once complete, power cord management for an ML6030 CM plus two PowerVault ML6000 9U Library Expansion Modules
should look similar to
Figure 12.
Figure 12 Power Cord Management
Managing Ethernet Cables
A Dell PowerVault ML6000 library with FC I/O blades uses external Ethernet cables on the rear of the library to provide
connectivity between the LCB in the 5U Library Control Module and a 9U Library Expansion Module. The upper and lower FC
I/O blade bays within a 9U Library Expansion Module each have a corresponding Ethernet port on the back of the module.
Running an Ethernet cable between this port and one of the Ethernet hub ports on the LCB establishes Ethernet connectivity
To Next Page
Loading...
