Library Specifications
file:///T|/htdocs/stor-sys/ML6000/en/html/appa.htm[9/17/2012 1:51:03 PM]
ML6030 CM + (1) 9U Expansion Module 32U 55.9 in. x 17.4 in. x 31.4 in
(141.9 cm x 44.2 cm x 79.8 cm)
ML6030 CM + (2) 9U Expansion Modules 41U 71.6 in. x 17.4 in. x 31.4 in
(181.9 cm x 44.2 cm x 79.8 cm)
Component Weights
Component Weight
Drive Sled 10 lbs (4.6 kg)
Power Supply 5 lbs (2.3 kg)
5U Chassis (empty) 60 lbs (27.2 kg)
9U Chassis (empty) 65 lbs (29.5 kg)
5U Packaging Kit 20 lbs (9 kg)
9U Packaging Kit 24 lbs (10.9 kg)
14U Packaging Kit 40 lbs (18 kg)
Library Power Consumption and Heat Output
The typical library power consumption (Watts/hour) and heat output (BTU/hour) is listed below.
Note: "Typical" values for tape drives assumes tape drives are writing.
Library Configuration
Typical Power Consumption
(Watts/Hour)
Typical Heat
Output
(BTU/Hour)
Subassembly Power Consumption:
PowerVault ML6000 Library with Robot and LCB (no tape drives
installed; robot moving; LCB installed)
79 269
UDS3 IBM LTO-3 Drive Sled Module (SCSI) 27 92
UDS3 IBM LTO-3 Drive Sled Module (Fibre Channel) 29 97
UDS3 IBM LTO-4 Drive Sled Module (Fibre Channel) 42 143
UDS3 IBM LTO-4 Drive Sled Module (SAS) 43 148
UDS3 IBM LTO-5 Drive Sled Module (Fibre Channel) 42 143
UDS3 IBM LTO-5 Drive Sled Module (SAS) 43 148
Fibre-Channel I/O Blade 36 123
Control Module:
Minimum (no drives installed; robot not moving) 47 160
Maximum (2 drives writing; robot moving) 166 565
To Next Page
Loading...
