Dell PowerVault ML6010 - Preparing to Use the New Library Configuration

Installing, Removing, and Replacing
file:///T|/htdocs/stor-sys/ML6000/en/html/ch08.htm[9/17/2012 1:50:35 PM]
Module's bottom plate.
Figure 20 Cover Plate Location After Removing a 9U Library Expansion Module
5U 14U 23U 32U
cover plate
cover plate 5U Library
Control Module
cover plate 5U Library
Control Module
9U Library Expansion Module
cover plate 5U Library
Control Module
9U Library Expansion Module 9U Library Expansion Module
5U Library
Control Module
9U Library Expansion Module 9U Library Expansion Module 9U Library Expansion Module
cover plate cover plate cover plate cover plate
Preparing to Use the New Library Configuration
Prepare to use the new library configuration as follows:
1 Ensure that the Y-rails are properly aligned and the thumbscrews are tightened.