Advanced Reporting
file:///T|/htdocs/stor-sys/ML6000/en/html/ch04_AdvRpt.htm[9/17/2012 1:49:37 PM]
• RRE — Recovered read errors
• URE — Unrecovered read errors
• RWE — Recovered write errors
• UWE — Unrecovered write errors
• LW — Cartridge lifetime MB written
• LR — Cartridge lifetime MB read
• Enc — Cartridge encryption status (U=Unknown, E=Encrypted, N=Not Encrypted)
To view, save, or e-mail the report, select Reports > Log Viewer from the web client. Select Media Usage Log from the
list of logs and click Next.
Automatically E-mailing Advanced Reporting Reports and Logs
You can configure the library to automatically e-mail Advanced Reporting logs and reports to specified recipients on a daily or
weekly basis.
You can create up to 20 e-mail recipients. If you want to send the same recipient a different set of reports, you can enter the
same e-mail address more than once, with different reports selected for each. Each entry counts as a unique recipient toward
the 20 total.
Note: Duplicate entries are not allowed. A duplicate entry means the same recipient is set to receive the exact same
reports in two different entries, regardless of the day or time. If you have duplicate recipients, make sure that the
reports selected in each entry are not an exact match.
For example, if you have one entry in which Recipient A receives the Drive Utilization and Media Integrity reports on
Monday, you cannot create another entry to send Recipient A the Drive Utilization and Media Integrity reports on
Thursday. Instead, you can create one entry for Recipient A and send the reports every day (select Daily as the day to
send the report), or you can change the reports you are sending so that they are not the same as the first entry. You
could create three entries for Recipient A as follows: 1) send both reports out on Monday; 2) send Drive Utilization out
on Thursday; and 3) send Media Integrity out on Thursday (in a different entry). The recipient is the same, but the
reports sent in each entry are different.
Each e-mail notification includes an optional comment text box you can use to enter information about the library or the
reports and logs that you want the recipient to know. This information appears in the body of the e mail.
You can modify the settings of an existing e-mail notification at any time after it is created. If an e-mail notification is no
longer needed, you can delete it.
Before the library can send e-mail notifications, you must configure the library e-mail account. For information on how to
configure the e-mail account, see
Configuring the Library E-mail Account.
Administrators can configure the library e-mail account and e-mail notifications. Users with user privileges can receive e mail
notifications, but they cannot configure the library e-mail account or e-mail notifications.
The path to open the appropriate screen is as follows:
• From the Web client, select Setup > Notifications > Advanced Reporting > Receiver Addresses.
Back to Contents Page
To Next Page
Loading...
