Installing, Removing, and Replacing
file:///T|/htdocs/stor-sys/ML6000/en/html/ch08.htm[9/17/2012 1:50:35 PM]
1 Y-rail in locked, non-functional position
b From the rear of the library, find the rear Y-rail release mechanism located in the interior of the right side of the
module. Squeeze the handle of the Y-rail release mechanism, lift it, and release it so that it locks into place.
4 Remove the rack ears that fasten the module to the rack. See Installing the Library in a Rack for detailed instructions
on using the rack ears.
5 Loosen the thumbscrews located at the base of the front of the module.
To Next Page
Loading...
