Description
file:///T|/htdocs/stor-sys/ML6000/en/html/ch02.htm[9/17/2012 1:49:17 PM]
For information on installing and cabling FC I/O blades and FC tape drives, see Installing, Removing, and Replacing.
Figure 9 FC I/O Blade
1 FC ports to host(s)
2 FC ports to drive(s)
3 LEDs (blue, amber, green)
Each FC I/O blade is cooled by a fan blade that is installed next to the FC I/O blade in the 9U Library Expansion Module. For
information on installing the fan blade, see Adding, Removing, and Replacing the FC I/O Fan Blade.
Figure 10 shows the FC I/O fan blade, including the LED. The single amber LED represents health status. For more
information on the behavior of the FC I/O fan blade LED, see
FC I/O Fan Blade LED.
Figure 10 FC I/O Fan Blade
To Next Page
Loading...
