Installing, Removing, and Replacing
file:///T|/htdocs/stor-sys/ML6000/en/html/ch08.htm[9/17/2012 1:50:35 PM]
8 Remove all tape cartridges from the library.
9 Remove the tape drives from the library to decrease the weight when lifting the modules.
Warning: Without tape drives, tape cartridges, or power supplies, a 5U Library Control Module
weighs approximately 60 lbs (27.2 kg). A 9U Library Expansion Module, without tape drives, tape
cartridges, or power supplies, exceeds 65 lbs (29.5 kg).
To avoid serious injury, at least two people are required to safely lift the modules.
10 Remove one module at a time from the rack. Retain the rack-mounting hardware and shelves for use in the new
location.
11 Place the module in the bottom of the shipping carton.
12 Reinstall the tape drives in the module.
13 Complete the packing. For further details, see the Unpacking instructions.
Back to Contents Page
To Next Page
Loading...
