Dell PowerVault - Page 31

Table 7. Recurring Syntax Elements
Recurring Syntax Syntax Value
raid-level (0 | 1 | 5| 6)
snapshot-repository-raid-level (1 | 5 | 6)
capacity-spec integer-literal [KB | MB | GB | TB | Bytes]
segment-size-spec integer-literal
boolean (TRUE | FALSE)
user-label string-literal
user-label-list user-label {user-label}
create-raid-vol-attr-value-list create-raid-virtual disk-attribute-valuepair
{create-raid-virtual disk-attribute-valuepair}
create-raid-virtual disk-attribute-value-pair capacity=capacity-spec | owner=(0 | 1) |
segmentSize=integer-literal
RAID controller module-enclosureId (0–99)
slot-id (0–31)
port-id (0–127)
physical disk-spec enclosureID, slotID
physical disk-spec-list physical disk-spec {physical disk-spec}
enclosure-id-list enclosureID {enclosureID}
hex-literal 0x hexadecimal-literal
virtual disk-group-number integer-literal
filename string-literal
error-action (stop | continue)
physical disk-channel-identifier (1 | 2)
physical disk-channel-identifier-list physical disk-channel-identifier {physical disk-
channel-identifier}
host-channel-identifier (01 | 02 | 11 | 12)
physical disk-type (Serial Attached SCSI [SAS])
feature-identifier (snapshot | virtualDiskCopy)
repository-spec instance-based-repository-spec | count-based-
repository-spec
ethernet-port-options IPV4Address=ipv4-address|
IPV4ConfigurationMethod=[(static | dhcp)] |
IPV4GatewayIP=ipv4-address|
IPV4SubnetMask=ipv4-address|
iscsi-host-port-options IPV4Address=ipv4-address |
31