Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
USB dongle-bay cover
Removing USB dongle-bay cover
CAUTION: Place the computer on a at, soft and clean surface to avoid scratches on the
display.
1 Follow the procedure in Before working inside your computer
2 Place the computer face down.
3 Press and pull the USB dongle-bay cover out of your computer.
Installing dongle-bay cover
1 Align the tabs on the USB dongle-bay cover into the slots on the back cover and snap the USB dongle-bay cover into place.
2 Follow the procedure in After working inside your computer.
2
Removing and installing components 13
To Next Page
Loading...
