Installing system fan
1 Align the screw holes on the system fan with the screw holes on the middle frame.
2 Replace the four screws (M3X4) that secure the system fan to the middle frame.
3 Connect the system fan cable to the system board.
4 Connect the power-supply unit cable to its connector on the system board.
5 Route the power-supply unit cable through the routing guides on the system fan.
6 Install the:
a system-board shield.
b stand
c back cover
d USB dongle-bay cover
7 Follow the procedure in After working inside your computer
Power supply unit
Removing power supply unit
1 Follow the procedure in Before working inside your computer.
2 Remove the:
30
Removing and installing components
To Next Page
Loading...
