Dell Precision 5720 - USB-Dongle Port; Removing USB-Dongle Port

USB-dongle port
Removing USB-dongle port
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a USB dongle-bay cover
b back cover
c stand
d inner frame
e system-board shield.
f I/O panel
3 Remove the three screws (M3X4) that secure the USB dongle port to the I/O panel.
4 Remove the USB dongle port cable from the routing guide on I/O panel [2].
5 Remove the USB dongle port from the I/O panel. [3]
40
Removing and installing components