WLAN card
Removing wireless card
1 Remove the:
a USB dongle-bay cover
b back cover
c system-board shield
2 Remove the antenna cables from the securing clip [1].
3 Remove the two screws (M2X2.5) that secure the wireless-card shield to the system board [2].
4 Lift the wireless-card shield o the system board [3].
5 Remove the screw (M2X2.5) that secures the wireless-card bracket and the wireless card to the system board [4].
6 Lift the wireless-card bracket o the wireless card [5].
7 Disconnect the antenna cables from the wireless card [6].
8 Slide and remove the wireless card out of the wireless-card slot [7].
26 Removing and installing components
To Next Page
Loading...
