a stand
b back cover
c USB dongle-bay cover
11 Follow the procedure in After working inside your computer
Microphone
Removing microphone
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a USB dongle-bay cover
b back cover
c system-board shield
d stand
e inner frame
3 Disconnect the microphone cable from the system board [1].
4 Remove the four screws (M2X2.2) that secure the microphone module to the middle frame [2].
5 Release microphone cable from the routing guides on the middle frame [3].
6 Using a plastic scribe, carefully pry and lift the microphone modules (4) with the cable o the slots on the middle frame [4].
36
Removing and installing components
To Next Page
Loading...
