Dell Precision 5720 - Page 64

v media-card reader
w camera.
3 Press the tabs on the cable to release it from the connector [1].
4 Disconnect the cable from its slot on the middle frame [2].
5 Open the latch and disconnect the display cable from its slot on the middle frame. [3]
6 Lift the display cable o the middle frame [4].
7 Press the tabs on the backlight cable [5].
8 Disconnect the backlight cable from its slot on the middle frame [6].
9 Remove the seven screws (M3X4) that secure the middle frame to the display panel [1].
10 Remove the six screws (M2X3) that secure the middle frame to the speaker bezel [2].
11 Lift the middle frame o the display [3].
64
Removing and installing components