Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
447
6 To create a service definition, enter the following information:
7 Navigate to Ports in the left navigation.
Click Add.
8 Select HTTPS from the Service Name drop-down list.
9 Select ALLOW always in the Action drop-down list.
10 Enter the WAN IP address of the SMA/SRA appliance (ex.192.168.100.2) in the Local Server Address
field.
11 Click Accept to save changes.
Your Netgear gateway device is now ready for operations with the SMA/SRA appliance.
Name HTTPS
Type TCP/U DP
Start Port 443
Finish Port 443
To Next Page
Loading...
