2 Remove the SD memory card
3 Remove the base cover
4 Remove the battery
5 Remove the memory
6 Remove the WLAN
7 Remove the SSD
8 Remove the hard drive assembly
9 Remove the system fan
10 Remove the heatsink
11 Remove the display assembly
12 Remove the power button board
13 Remove the system board
Steps
1 Remove the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [1].
2 Peel the adhesive o the power adapter port cable [2].
3 Lift the power adapter port, along with its cable, o the palmrest and keyboard assembly [3].
Removing and installing components 69
To Next Page
Loading...
