Identifier GUID-CA63CF9E-83FD-4B12-9A33-5E7A4DBAB972
Status Released
Removing the solid-state drive
(full-length)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-28F89DF8-99BB-4B9C-88D1-6DB4494163CF
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery (half-length) or the battery (full-length).
Identifier GUID-7B2E5A47-FAA4-4AA9-B3F5-2284E315C53B
Status Released
Procedure
1 Remove the screw (M2x3) that secures the solid-state drive to the system
board.
37