Identifier GUID-8F688CA0-8CD9-4D38-9D34-81544EC60A32
Status Released
Procedure
NOTE: The touch-screen cable is available only on laptop congurations
with touch displays.
1 Remove the screw (M2x2) that secures the display-cable bracket to the system
board.
2 Lift the solid-state drive bracket to access the display cable.
3 Disconnect the display cable from the system board.
Figure 21. Disconnecting the display cable
1
display-cable bracket 2 screw
3 display cable
4 Disconnect the power-adapter port cable, speaker cable, keyboard-control board
cable, touch-pad cable and ngerprint reader cable from the system board.
63
To Next Page
Loading...
